Aditya.Hananto.net

Sesuai contoh topologi di atas, jaringan dibagi menjadi 4 VLAN/logical subnet yaitu:
1. Native VLAN (default VLAN 1)
subnet: 10.1.0.0/24
gateway: 10.1.0.1
2. Subnet untuk Divisi Engineer (VLAN 2)
subnet: 10.1.1.0/24
gateway: 10.1.1.1
3. Subnet untuk Divisi Finance (VLAN 3)
subnet: 10.1.2.0/24
gateway: 10.1.2.1
4. Subnet untuk Divisi Sales (VLAN 4)
subnet: 10.1.3.0/24
gateway: 10.1.3.1
Floor1-SW & Floor2-SW dijadikan sebagai VTP client, sehingga kedua switch ini hanya bisa [...]

Posted on March 18th, 2010 under Networking. Tags: catalyst, ccna, cisco, switch, switching, vlan. Comments: 5

Konfigurasi Router-JKT:
# conf t
(config)# ipv6 unicast-routing
(config)# ipv6 router rip RIP-JKT
(config)# int s0/1
(config-if)# description *** TO Router-SBY ***
(config-if)# ipv6 address 2002:10:1:2::1/64        –> static manual IPv6 address assignment
(config-if)# ipv6 rip RIP-JKT enable        –> mengaktifkan routing RIP di interface
(config-if)# no shutdown
(config-if)# int s0/0
(config-if)# description *** TO Router-MDN ***
(config-if)# ipv6 address 2002:10:1:4::1/64
(config-if)# ipv6 rip RIP-JKT enable
(config-if)# no [...]

Posted on January 18th, 2010 under Networking. Tags: ccna, cisco, ipv6, router, routing. Comments: None

Konfigurasi Router-JKT:
# conf t
(config)# ipv6 unicast-routing
(config)# int s0/1
(config-if)# description *** TO Router-SBY ***
(config-if)# ipv6 address 2002:10:1:2::1/64    –>  static manual IPv6 address assignment
(config-if)# no shutdown
(config-if)# int s0/0
(config-if)# description *** TO Router-MDN ***
(config-if)# ipv6 address 2002:10:1:4::1/64
(config-if)# no shutdown
(config-if)# int f0/0
(config-if)# description *** TO LAN JKT ***
(config-if)# ipv6 address 2002:10:1:3::/64 eui-64    –> static eui-64 IPv6 address assignment
(config-if)# no [...]

Posted on January 16th, 2010 under Networking. Tags: ccna, cisco, ipv6, router, routing. Comments: None

Konfigurasi PAT di Router:
(config)# access-list 9 permit 172.17.0.0 0.0.0.255
(config)# access-list 9 permit 172.17.1.0 0.0.0.255
ATAU
(config)# access-list 9 permit 172.17.0.0 0.0.1.255
(config)# ip nat inside source list 9 int s0/0 overload
(config)# int s0/0
(config-if)# ip nat outside
(config-if)# int f0/0
(config-if)# ip nat inside
(config-if)# int f0/1
(config-if)# ip nat inside
(config-if)# end
verifikasi konfigurasi PAT:
# sh ip nat translation
# debug ip nat
–
Quote of [...]

Posted on January 11th, 2010 under Networking. Tags: ccna, cisco, nat, pat, router. Comments: 1