Aditya.Hananto.net

Konfigurasi OSPF di Router-JKT:
(config)# interface loopback 0
(config-if)# ip address 10.0.255.1 255.255.255.255      ==> sebagai router-id OSPF
(config-if)# no shutdown

(config-if)# router ospf 1                                                ==> menggunakan process-id 1
(config-router)# network 10.0.255.1 0.0.0.0 area 0
(config-router)# network 10.0.0.0   0.0.0.3 area 0
(config-router)# network 10.0.0.4   0.0.0.3 area 0
(config-router)# end

Konfigurasi OSPF di Router-SBY:
(config)# interface loopback 0
(config-if)# ip address 10.0.255.3 255.255.255.255
(config-if)# no shutdown

(config-if)# router ospf 1
(config-router)# network 10.0.255.3 0.0.0.0 area 0
(config-router)# network 10.0.0.4   0.0.0.3 area 0
(config-router)# network 10.2.1.0   0.0.0.3 area 2
(config-router)# end

Konfigurasi OSPF di Router-MKS:
(config)# interface loopback 0
(config-if)# ip address 10.2.255.1 255.255.255.255
(config-if)# no shutdown

(config-if)# router ospf 2
(config-router)# network 10.2.255.1 0.0.0.0 area 2
(config-router)# network 10.2.0.0   0.0.0.255 area 2
(config-router)# network 10.2.1.0   0.0.0.3 area 2
(config-router)# end

Konfigurasi OSPF di Router-MDN:
(config)# interface loopback 0
(config-if)# ip address 10.0.255.2 255.255.255.255
(config-if)# no shutdown

(config-if)# router ospf 2
(config-router)# network 10.0.255.2 0.0.0.0 area 0
(config-router)# network 10.0.0.0   0.0.0.3 area 0
(config-router)# network 10.1.1.0   0.0.0.3 area 1
(config-router)# end

Konfigurasi OSPF di Router-ACEH:
(config)# interface loopback 0
(config-if)# ip address 10.1.255.1 255.255.255.255
(config-if)# no shutdown

(config-if)# router ospf 3
(config-router)# network 10.1.255.1 0.0.0.0 area 1
(config-router)# network 10.1.0.0   0.0.0.255 area 1
(config-router)# network 10.1.1.0   0.0.0.3 area 1
(config-router)# end

Untuk verifikasi konfigurasi OSPF:
# sh ip route          ==> melihat routing table
# sh ip protocol       ==> melihat routing protocol yg telah dikonfigurasi
# sh ip ospf neighbor  ==> melihat neighbor table OSPF
# sh ip ospf database  ==> melihat LSDB OSPF
# sh ip route ospf     ==> melihat routing table OSPF

# debug ip ospf packet ==> melihat proses mengirim & menerima paket OSPF
# debug ip ospf event  ==> melihat event yg terjadi di OSPF
# terminal monitor     ==> utk melihat hasil debug (khusus bagi yg via telnet/SSH)
# no debug all  ATAU  #undebug all   ==> mematikan proses debugging

Posted on January 6th, 2010 under Networking • Tags: ccna, cisco, ospf, router, routing. • RSS 2.0 feed • Leave a response, or trackback